Reduction - 1/2" BSP x 1/8" BSP female - WD seal
Threaded reducer for adapting between two BSPP (Whitworth Parallel Pipe) thread sizes in hydraulic ports and pipework. The fitting has an external G 1/2 thread on one side and an internal G 1/8 thread on the other, providing a compact male-to-female reduction.
Sealing is via a profile sealing ring in NBR, supporting a leak-tight connection at the interface. The steel body is zinc-nickel plated and rated for a maximum pressure of 630 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Adapting between G 1/2 and G 1/8 BSPP connections in hydraulic lines and component ports
- Hydraulic assemblies where a compact threaded size reduction is required
Varenummer:
RI-12-18ED
Pakke str.:
25 pcs
Min. bestillingsenhed er:
1 pcs
Gevind indvendig
G 1/8 BSP
Gevind udvendig
G 1/2 BSP
Korrosions resistens
1200 hours salt spray DIN EN ISO 9227
L1
24 mm
L2
8 mm
Længde
24 mm
Materiale
Steel
Model kode
FI-RED-R1/2-WD-R1/8-B-W3
Mærke navn
Stauff
Overfladebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
S1
27 mm
Sekskant
27 mm
Sikkerhedsfaktor
4
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1/8 BSP
Totallængde
24 mm
Tryk maks.
630 bar
Type
Short
Vinkel
0 °
i
14 mm
Pakkestr.
25 pcs
Strekkode
130487
Bruttovekt
0,07 Kg
Nettovekt
0,07 Kg
Opprinnelsesland
DEU
Intrastat produktkode
73071110
Threaded reducer for adapting between two BSPP (Whitworth Parallel Pipe) thread sizes in hydraulic ports and pipework. The fitting has an external G 1/2 thread on one side and an internal G 1/8 thread on the other, providing a compact male-to-female reduction.
Sealing is via a profile sealing ring in NBR, supporting a leak-tight connection at the interface. The steel body is zinc-nickel plated and rated for a maximum pressure of 630 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Adapting between G 1/2 and G 1/8 BSPP connections in hydraulic lines and component ports
- Hydraulic assemblies where a compact threaded size reduction is required
Merk: Å åpne 3D-filer krever et program som stotter filformatet
Copyright © 2026 HydraSpecma