Reduction - 1/2" BSP x 1/4" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP) with different sizes in hydraulic and fluid power assemblies. The reducer provides a G 1/2 male thread on one side and a G 1/4 female thread on the other.
The sealing concept uses a profile sealing ring with NBR sealing material. Selection is primarily based on the BSPP thread sizes and the pressure rating of 630 bar. The fitting has a zinc-nickel plated surface treatment and a 27 mm hex for wrench tightening. Overall length is 24 mm.
Typical Applications
- Adapting between BSPP ports and fittings where a change from G 1/2 to G 1/4 is required
- Hydraulic line and manifold assemblies using BSPP parallel pipe threads with profile sealing
Partnumber:
RI-12-14ED
Package size:
1 pcs
Min. order quantity is:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Hexagon
27 mm
L1
24 mm
L2
12 mm
Length
24 mm
Material
Steel
Model code
FI-RED-R1/2-WD-R1/4-B-W3
Pressure max.
630 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
27 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1/4 BSP
Thread inner
G 1/4 BSP
Thread outer
G 1/2 BSP
Total length
24 mm
Type
Short
i
14 mm
Package size
1 pcs
Barcode
130484
Gross weight
0,05 Kg
Net weight
0,05 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP) with different sizes in hydraulic and fluid power assemblies. The reducer provides a G 1/2 male thread on one side and a G 1/4 female thread on the other.
The sealing concept uses a profile sealing ring with NBR sealing material. Selection is primarily based on the BSPP thread sizes and the pressure rating of 630 bar. The fitting has a zinc-nickel plated surface treatment and a 27 mm hex for wrench tightening. Overall length is 24 mm.
Typical Applications
- Adapting between BSPP ports and fittings where a change from G 1/2 to G 1/4 is required
- Hydraulic line and manifold assemblies using BSPP parallel pipe threads with profile sealing
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma