Stud fitting - ø25S indv x 3/4" BSP - o-ring seal
Straight stud fitting for connecting a 25 mm tube connection in S series to a male G 3/4 BSPP thread. The stud side uses an O-ring sealing interface to form a sealed connection in a BSPP port.
Selection is typically based on tube outside diameter, series, thread size, and required pressure and temperature range. The fitting is specified with NBR as sealing material and a zinc-nickel plated surface treatment.
Typical Applications
- Hydraulic tube-to-port connections where a 25 mm S-series tube connection must be adapted to a G 3/4 BSPP port
- Pipework and component port connections where O-ring sealing is required on the BSPP stud side
Varenummer:
EGE25SR34ED
Pakke str.:
15 pcs
Min. bestillingsenhed er:
1 pcs
D1
25 mm
D2
17 mm
Diameter rør
25 mm
Gjenger innvendig metrisk
M36x2
Gjenger utvendig
G 3/4 BSP
Korrosjonsmotstand
1200 hours salt spray DIN EN ISO 9227
L1
49 mm
Materiale
Steel
Merke navn
Stauff
Overflatebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
S1
36 mm
S2
46 mm
Serie
S
Sikkerhets faktor
4
T
G 3/4 BSP
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Tilspenning moment
180 Nm
Trykk maks.
400 bar
Tråd T
G 3/4 BSP
Vinkel
0 °
i
16 mm
Pakke str.
15 pcs
Stregkode
249589
Brutto vægt
0,46 Kg
Netto vægt
0,46 Kg
Oprindelsesland
DEU
Intrastat varekode
73071110
Straight stud fitting for connecting a 25 mm tube connection in S series to a male G 3/4 BSPP thread. The stud side uses an O-ring sealing interface to form a sealed connection in a BSPP port.
Selection is typically based on tube outside diameter, series, thread size, and required pressure and temperature range. The fitting is specified with NBR as sealing material and a zinc-nickel plated surface treatment.
Typical Applications
- Hydraulic tube-to-port connections where a 25 mm S-series tube connection must be adapted to a G 3/4 BSPP port
- Pipework and component port connections where O-ring sealing is required on the BSPP stud side
Copyright © 2026 HydraSpecma