Stud fitting - ø25S indv x 3/4" BSP - o-ring seal
Straight stud fitting for connecting a 25 mm tube connection in S series to a male G 3/4 BSPP thread. The stud side uses an O-ring sealing interface to form a sealed connection in a BSPP port.
Selection is typically based on tube outside diameter, series, thread size, and required pressure and temperature range. The fitting is specified with NBR as sealing material and a zinc-nickel plated surface treatment.
Typical Applications
- Hydraulic tube-to-port connections where a 25 mm S-series tube connection must be adapted to a G 3/4 BSPP port
- Pipework and component port connections where O-ring sealing is required on the BSPP stud side
Partnumber:
EGE25SR34ED
Package size:
15 pcs
Min. order quantity is:
1 pcs
Angle
0 °
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D1
25 mm
D2
17 mm
Diameter pipe
25 mm
L1
49 mm
Material
Steel
PN
420 bar
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
36 mm
S2
46 mm
Safety factor
4
Sealing material
NBR
Series
S
Surface treatment
Zinc-Nickel plated
T
G 3/4 BSP
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T
G 3/4 BSP
Thread inner metric
M36x2
Thread outer
G 3/4 BSP
Torque tightening
180 Nm
i
16 mm
Package size
15 pcs
Barcode
249589
Gross weight
0,46 Kg
Net weight
0,46 Kg
Country of origin
DEU
Intrastat code
73071110
Straight stud fitting for connecting a 25 mm tube connection in S series to a male G 3/4 BSPP thread. The stud side uses an O-ring sealing interface to form a sealed connection in a BSPP port.
Selection is typically based on tube outside diameter, series, thread size, and required pressure and temperature range. The fitting is specified with NBR as sealing material and a zinc-nickel plated surface treatment.
Typical Applications
- Hydraulic tube-to-port connections where a 25 mm S-series tube connection must be adapted to a G 3/4 BSPP port
- Pipework and component port connections where O-ring sealing is required on the BSPP stud side
Copyright © 2026 HydraSpecma