Sun load control valve 3:1

0,3 bar cracking pressure

CBEA-LHN;1,7 bar cracking pressure

This valve does not have positive seals on the pilot section and will pass up to 32 cc/min.@70 bar between port 2 and port 3. This is a consideration in master-slave circuits and in the leak testing of valve-cylinder assemblies.

All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

;

3:1 pilot ratio, standard capacity counterbalance valve

Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Other names for this valve include motion control valve and over-center valve.

Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
Turn adjustment clockwise to decrease setting and release load.
Full clockwise setting is less than 14 bar.
Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.
Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
Two check valve cracking pressures are available. Use the 1,7 bar check unless actuator cavitation is a concern.

CBEA-LAN

Partnumber:

CBEA-LHN

Package size:

1 st

Min. order quantity is:

1 st

Specifications
Dimensions and shipping

Brand Name

Sun Hydraulics

Cavity

T-2A

Contamination level max.

19/17/14 - ISO 4406

Flow rate nominal LMin

120 lpm

Material

Steel

Model code

CBEALHN

Oil viscocity recommended

2,8 - 380 cSt

Pilot ratio

3:1

Pressure max.

350 bar

Pressure setting max.

280 bar

Pressure setting min.

70 bar

Sealing material

NBR

Temperature max.

+110 °C

Temperature min.

-30 °C

Torque tightening

61 - 68 Nm

Package size

1 st

Barcode

236695

Gross weight

0,30 Kg

Net weight

0,30 Kg

Country of origin

Intrastat code

84812010

Product information

0,3 bar cracking pressure

CBEA-LHN;1,7 bar cracking pressure

All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

;

3:1 pilot ratio, standard capacity counterbalance valve

Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
Turn adjustment clockwise to decrease setting and release load.
Full clockwise setting is less than 14 bar.
Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.
Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
Two check valve cracking pressures are available. Use the 1,7 bar check unless actuator cavitation is a concern.