3/4" Hydraulic hose SPT-212CH - 2SC WP 280 bar
Hydraulic hose for conveying oil, diesel and grease in hydraulic lines where a compact 2SC construction is required. The hose is built with a nitrile (NBR) inner tube and a synthetic rubber cover, reinforced with a 2-layer high-tensile steel wire braid.
With a 19 mm inner diameter and 27,7 mm outer diameter, the hose is selected by size and pressure requirement. The working pressure is 280 bar with minimum bursting pressure 1120 bar. The specified bend radius of 120 mm supports routing in installations with limited space. Flame-resistant execution and compliance with EN 857 2SC and ISO 11237 2SC are specified.
Typical Applications
- Hydraulic hose lines for oil-based fluids
- Lines for diesel and grease in hydraulic service circuits
Partnumber:
SPT212CH
Package size:
350 m
Min. order quantity is:
1 m
Area of use
Diesel, Grease, Oil
Bend radius
120 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
19 mm
Diameter outer
27.7 mm
Flameresistant
Yes
Hose size
3/4 "
Hose type
2SC
Order unit
Single hose
Pressure burst min.
1120 bar
Pressure max.
280 bar
REACH compliant
Yes
Reinforcement
2 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperature intermittent max.
+135 °C
Temperature max.
+120 °C
Temperature min.
-40 °C
Tube
NBR (Nitrile)
Package size
350 m
Barcode
421698
Gross weight
0,28 Kg
Net weight
0,28 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose for conveying oil, diesel and grease in hydraulic lines where a compact 2SC construction is required. The hose is built with a nitrile (NBR) inner tube and a synthetic rubber cover, reinforced with a 2-layer high-tensile steel wire braid.
With a 19 mm inner diameter and 27,7 mm outer diameter, the hose is selected by size and pressure requirement. The working pressure is 280 bar with minimum bursting pressure 1120 bar. The specified bend radius of 120 mm supports routing in installations with limited space. Flame-resistant execution and compliance with EN 857 2SC and ISO 11237 2SC are specified.
Typical Applications
- Hydraulic hose lines for oil-based fluids
- Lines for diesel and grease in hydraulic service circuits
Copyright © 2026 HydraSpecma