3/4" Hydraulic hose SPT-212CH - 2SC WP 280 bar
Hydraulic hose for conveying oil, diesel and grease in hydraulic lines where a compact 2SC construction is required. The hose is built with a nitrile (NBR) inner tube and a synthetic rubber cover, reinforced with a 2-layer high-tensile steel wire braid.
With a 19 mm inner diameter and 27,7 mm outer diameter, the hose is selected by size and pressure requirement. The working pressure is 280 bar with minimum bursting pressure 1120 bar. The specified bend radius of 120 mm supports routing in installations with limited space. Flame-resistant execution and compliance with EN 857 2SC and ISO 11237 2SC are specified.
Typical Applications
- Hydraulic hose lines for oil-based fluids
- Lines for diesel and grease in hydraulic service circuits
Partnumber:
SPT212CH
Package size:
350 m
Min. order quantity is:
1 m
Användingsområde
Diesel, Grease, Oil
Armering
2 layer high tensile steel wire braid
Bestillingsenhed
Single hose
Böjningsradie
120 mm
Diameter inv.
19 mm
Diameter utv.
27.7 mm
Flamresistent
Yes
Innertub
NBR (Nitrile)
Märke namn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slangdimension
3/4 "
Slangtyp
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermittent max.
+135 °C
Temperatur max.
+120 °C
Temperatur min.
-40 °C
Tryck max.
280 bar
Tryck spräng min.
1120 bar
Yttertub
Synthetic rubber
Package size
350 m
Barcode
421698
Gross weight
0,28 Kg
Net weight
0,28 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose for conveying oil, diesel and grease in hydraulic lines where a compact 2SC construction is required. The hose is built with a nitrile (NBR) inner tube and a synthetic rubber cover, reinforced with a 2-layer high-tensile steel wire braid.
With a 19 mm inner diameter and 27,7 mm outer diameter, the hose is selected by size and pressure requirement. The working pressure is 280 bar with minimum bursting pressure 1120 bar. The specified bend radius of 120 mm supports routing in installations with limited space. Flame-resistant execution and compliance with EN 857 2SC and ISO 11237 2SC are specified.
Typical Applications
- Hydraulic hose lines for oil-based fluids
- Lines for diesel and grease in hydraulic service circuits
Copyright © 2026 HydraSpecma