Wire-braided hydraulic hose for conveying hydraulic media in high-pressure fluid power lines. The hose is built with a NBR (nitrile) tube, two layers of high tensile steel wire braid reinforcement, and a synthetic rubber cover.
With a 5/8" (16 mm) inner diameter and 23.6 mm outer diameter, this hose is suited for hydraulic lines where a compact routing is needed, supported by a minimum bend radius of 90 mm. Rated working pressure is 350 bar with a minimum bursting pressure of 1400 bar. The hose meets EN 857 2SC and ISO 11237 2SC and is specified as flame resistant.
Wire-braided hydraulic hose for conveying hydraulic media in high-pressure fluid power lines. The hose is built with a NBR (nitrile) tube, two layers of high tensile steel wire braid reinforcement, and a synthetic rubber cover.
With a 5/8" (16 mm) inner diameter and 23.6 mm outer diameter, this hose is suited for hydraulic lines where a compact routing is needed, supported by a minimum bend radius of 90 mm. Rated working pressure is 350 bar with a minimum bursting pressure of 1400 bar. The hose meets EN 857 2SC and ISO 11237 2SC and is specified as flame resistant.