Reduction - 3/4"BSP x 3/8"BSP female - WD seal
Thread reducer for adapting between two BSPP ports in a hydraulic line or component connection where a change from G 3/4 to G 3/8 is required. The design combines a male BSPP thread on one side with a female BSPP thread on the other to create a compact size transition.
Sealing is via a profile sealing ring in NBR, supporting a sealed connection at the threaded interface. The body is steel with a zinc-nickel plated surface treatment. Rated for a maximum operating pressure of 400 bar and a temperature range of -35 to +100.
Typical Applications
- Reducing BSPP port size on hydraulic components from G 3/4 to G 3/8
- Thread size transitions in hydraulic pipework and service connections
Artikelnummer:
KN-12-06
Förpackningsstorlek:
50 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Diameter pipe
0 mm
Hexagon
32 mm
L1
26 mm
L2
12,5 mm
Length
26 mm
Material
Steel
Model code
FI-RED-R3/4-WD-R3/8-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
32 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 3/4 BSP
Thread T2
G 3/8 BSP
Thread inner
G 3/8 BSP
Thread outer
G 3/4 BSP
Total length
26 mm
Type
Short
i
16 mm
Förpackningsstorlek
50 pcs
Streckkod
399803
Bruttovikt
0,08 Kg
Nettovikt
0,08 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two BSPP ports in a hydraulic line or component connection where a change from G 3/4 to G 3/8 is required. The design combines a male BSPP thread on one side with a female BSPP thread on the other to create a compact size transition.
Sealing is via a profile sealing ring in NBR, supporting a sealed connection at the threaded interface. The body is steel with a zinc-nickel plated surface treatment. Rated for a maximum operating pressure of 400 bar and a temperature range of -35 to +100.
Typical Applications
- Reducing BSPP port size on hydraulic components from G 3/4 to G 3/8
- Thread size transitions in hydraulic pipework and service connections
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma