Reduction - 1/2" BSP x 1.1/4" BSP female - WD seal
Thread reducer for adapting between two different Whitworth parallel pipe thread sizes in a hydraulic line or component port. One side has a G 1/2 male BSPP thread and the other side a G 1.1/4 female BSPP thread.
Sealing is via a WD profile sealing ring in NBR. The body is steel with zinc-nickel surface treatment. Key selection characteristics include the BSPP thread sizes, the profile sealing ring sealing concept, the overall length of 53 mm, and a maximum working pressure of 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Hydraulic pipework where BSPP ports and fittings of different sizes must be connected
- Adaptation between hydraulic components and lines using profile sealing ring sealing
Osanumero:
KN-08-20
Pakkauskoko:
10 pcs
Pienin tilausmäärä on:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D2
10 mm
Hexagon
55 mm
L1
53 mm
L2
26,5 mm
Length
53 mm
Material
Steel
Model code
FI-RED-R1/2-WD-R1-1/4-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
55 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1.1/4 BSP
Thread inner
G 1.1/4 BSP
Thread outer
G 1/2 BSP
Total length
53 mm
Type
Long
i
14 mm
Pakkauskoko
10 pcs
Viivakoodi
399801
Bruttopaino
0,47 Kg
Nettopaino
0,47 Kg
Alkuperämaa
DEU
Intrastat-koodi
73071110
Thread reducer for adapting between two different Whitworth parallel pipe thread sizes in a hydraulic line or component port. One side has a G 1/2 male BSPP thread and the other side a G 1.1/4 female BSPP thread.
Sealing is via a WD profile sealing ring in NBR. The body is steel with zinc-nickel surface treatment. Key selection characteristics include the BSPP thread sizes, the profile sealing ring sealing concept, the overall length of 53 mm, and a maximum working pressure of 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Hydraulic pipework where BSPP ports and fittings of different sizes must be connected
- Adaptation between hydraulic components and lines using profile sealing ring sealing
Huomautus: 3D-tiedostojen avaaminen vaatii ohjelman, joka tukee tiedostomuotoa
Copyright © 2026 HydraSpecma