1" Insert - (25S) M36x2 female - 45°
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Varenummer:
16GS25FDHORX45
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
A
159,7 mm
Angle
45 °
B
103,3 mm
Brand Name
Gates
Corrosion resistance
500 hours salt spray ASTM B-117
D
1"
DN
25
Diameter pipe
25 mm
E
35,1 mm
H
46 mm
Hose coupling type
For separate ferrule
Hose size
1 "
Material
Steel
Model code
16GS-25FDHORX45
REACH compliant
Yes
RoHs compliant
Yes
Sealing material
NBR
Series
S
Surface treatment
TuffCoat™
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread inner metric
M36x2
Torque tightening
125 - 135 Nm
Pakkauskoko
1 pcs
Viivakoodi
200499
Bruttopaino
0,65 Kg
Nettopaino
0,65 Kg
Alkuperämaa
CZE
Intrastat-koodi
73269098
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Copyright © 2026 HydraSpecma