5/8" Insert - (20S) M30x2 female - 45°
Hydraulic hose insert for assembling a hose end with a separate ferrule. The 45° angled design helps route the hose where a straight fitting would create an unfavorable bend or limited clearance.
Configured with a 5/8" hose insert interface and an M30x2 female threaded port. The 45° elbow angle is a key selection factor when directing the hose line to match the required layout.
Typical Applications
- Hydraulic hose assemblies where a 45° outlet direction is required
- Hose routing in confined installations where bend direction and space are critical
Osanumero:
10GS20FDHORX45
Pakkauskoko:
1 pcs
Pienin tilausmäärä on:
1 pcs
A
121,6 mm
B
71,3 mm
D
5/8"
DN
16
E
24,9 mm
H
36 mm
Kierre sisä
M30x2
Kiristysmomentti
105 - 115 Nm
Korroosionkestävyys
500 hours salt spray ASTM B-117
Kulma
45 °
Letkun kytkentätyyppi
For separate ferrule
Letkunhalkaisija sis.
5/8 "
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Mallikoodi
10GS-20FDHORX45
Materiaali
Steel
Pinta
TuffCoat™
Putken halkaisija
20 mm
REACH yhteensopiva
Yes
RoHS yhteensopiva
Yes
Sarja
S
Tiivistysmateriaali
NBR
Tuotemerkit
Gates
Package size
1 pcs
Barcode
200129
Gross weight
0,29 Kg
Net weight
0,29 Kg
Country of origin
CZE
Intrastat code
73269098
Hydraulic hose insert for assembling a hose end with a separate ferrule. The 45° angled design helps route the hose where a straight fitting would create an unfavorable bend or limited clearance.
Configured with a 5/8" hose insert interface and an M30x2 female threaded port. The 45° elbow angle is a key selection factor when directing the hose line to match the required layout.
Typical Applications
- Hydraulic hose assemblies where a 45° outlet direction is required
- Hose routing in confined installations where bend direction and space are critical
Copyright © 2026 HydraSpecma