Metal oil filler and breather cap - 3my

Oil filler and breather cap for hydraulic reservoirs, combining a filling point with air filtration to protect the tank from solid contamination carried in by breathing air during level changes.

The cap mounts to the tank using a bolted flange and seals with an NBR seal. A 120 mm strainer basket supports cleaner filling by capturing coarse particles and diffusing the incoming oil flow into the reservoir. The air filter fineness is 3 µm with a nominal airflow of 450 l/min.

Typical Applications
  • Hydraulic reservoirs requiring filtered air exchange during operation
  • Tank filling points used during commissioning and maintenance

Artikelnummer:
TAP90RL03

Förpackningsstorlek:
0 pcs

Minsta beställningskvantitet:
1 pcs
Antal bultar
6

Bultcirkel
73 mm

Diameter bulthål
5,0 mm

Diameter hål
51 mm

Diameter sil
44 mm

Flöde luft nominell
450 lpm

Luftfilter finhet
3 my

Modell kod
TAP90-R-03-A-0-0-1-P01

Montering
Bolt

Märke namn
MP Filtri

Packningsmaterial
NBR

Silhöjd
120 mm

Temperatur max.
+100 °C

Temperatur min.
-25 °C
Förpackningsstorlek
0 pcs

Streckkod
5704334328414

Bruttovikt
0,23 Kg

Nettovikt
0,23 Kg

Ursprungsland
ITA

Intrastat artikelkod
84212980

Oil filler and breather cap for hydraulic reservoirs, combining a filling point with air filtration to protect the tank from solid contamination carried in by breathing air during level changes.

The cap mounts to the tank using a bolted flange and seals with an NBR seal. A 120 mm strainer basket supports cleaner filling by capturing coarse particles and diffusing the incoming oil flow into the reservoir. The air filter fineness is 3 µm with a nominal airflow of 450 l/min.

Typical Applications
  • Hydraulic reservoirs requiring filtered air exchange during operation
  • Tank filling points used during commissioning and maintenance

Obs: För att öppna 3D-filer krävs ett program som stöder filformatet