1/2" Hydraulic hose SPT-208CH - 2SC WP 350 bar
Hydraulic hose with 1/2" size for conveying hydraulic media in high-pressure lines. The hose is built with an NBR (nitrile) inner tube and a synthetic rubber cover, and reinforced with a 2 layer high tensile steel wire braid for pressure capability.
Designed for use with diesel, grease, and oil. The compact bend radius supports routing in confined installations while maintaining the specified hose geometry.
Typical Applications
- High-pressure hydraulic hose lines for diesel, grease, and oil
- Hydraulic installations where a compact bend radius is required for hose routing
Varenummer:
SPT208CH
Pakke str.:
0 m
Min. bestillingsenhed er:
1 m
Area of use
Diesel, Grease, Oil
Bend radius
80 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
12.7 mm
Diameter outer
20.8 mm
Flameresistant
Yes
Hose size
1/2 "
Hose type
2SC
Order unit
Single hose
Pressure burst min.
1500 bar
Pressure max.
350 bar
REACH compliant
Yes
Reinforcement
2 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperature intermittent max.
+135 °C
Temperature max.
+120 °C
Temperature min.
-40 °C
Tube
NBR (Nitrile)
Pakke str.
0 m
Stregkode
5704334721369
Brutto vægt
0,28 Kg
Netto vægt
0,28 Kg
Oprindelsesland
ITA
Intrastat varekode
40092100
Hydraulic hose with 1/2" size for conveying hydraulic media in high-pressure lines. The hose is built with an NBR (nitrile) inner tube and a synthetic rubber cover, and reinforced with a 2 layer high tensile steel wire braid for pressure capability.
Designed for use with diesel, grease, and oil. The compact bend radius supports routing in confined installations while maintaining the specified hose geometry.
Typical Applications
- High-pressure hydraulic hose lines for diesel, grease, and oil
- Hydraulic installations where a compact bend radius is required for hose routing
Copyright © 2026 HydraSpecma