Reduction - 1.1/4" BSP x 1/2" BSP female - WD seal
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. One end has a G 1.1/4 male thread and the other end a G 1/2 female thread, allowing a larger female port to be connected to a smaller BSP connection.
The WD sealing design uses an NBR profile sealing ring to seal at the interface. The reducer is zinc-nickel plated and specified for a maximum working pressure of 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing an existing BSPP threaded port from G 1.1/4 to a G 1/2 connection in hydraulic lines and components
- Service and retrofit work where BSP thread size adaptation is required with a profile-seal interface
Partnumber:
RI11/4WD1/2
Package size:
0 pcs
Min. order quantity is:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Hexagon
50 mm
L1
32 mm
L2
14,5 mm
Length
32 mm
Material
Steel
Model code
FI-RED-R1-1/4-WD-R1/2-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
50 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1.1/4 BSP
Thread T2
G 1/2 BSP
Thread inner
G 1/2 BSP
Thread outer
G 1.1/4 BSP
Total length
32 mm
Type
Short
i
20 mm
Package size
0 pcs
Barcode
5704295277301
Gross weight
0,31 Kg
Net weight
0,31 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. One end has a G 1.1/4 male thread and the other end a G 1/2 female thread, allowing a larger female port to be connected to a smaller BSP connection.
The WD sealing design uses an NBR profile sealing ring to seal at the interface. The reducer is zinc-nickel plated and specified for a maximum working pressure of 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing an existing BSPP threaded port from G 1.1/4 to a G 1/2 connection in hydraulic lines and components
- Service and retrofit work where BSP thread size adaptation is required with a profile-seal interface
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma