Flow control valve, Tognella FT1253/5-01-38
Single-acting needle control valves for an accurate control of the fluid in one direction and free passage in the opposite direction.
Suitable for application with air, gas and liquids in general. Same basic characteristics as the FT 257 series: full shut off via metal seal; simple setting of flow rates; secure against accidental needle withdrawal; secure needle position with locking screw inserted in the handwheel; provisions for panel mounting, for which special lock nut (G) is supplied (on request only).
Materials:
Body: OT 58 - UNI 5705
Nickel plated.
Needle: X 10 Cr Ni S 1809 - UNI 6900.
O-ring: Nitrile.
Antiextrusion ring PTFE.
Handwheel: ma GD - Al Si 12 UNI 5706 aluminium.
Varenummer:
FT1253/5-38
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Dimension A
G 3/8 BSP
Dimension B
13 mm
Dimension C
55 mm
Dimension CH
22 mm
Dimension D
69 mm
Dimension E
7 mm
Dimension F
27 mm
Dimension G
12.5 mm
Dimension H metrisk
M20x1 mm
Dimension L
15 mm
Flow Nominel
23 lpm
Gevind
G 3/8 BSP
Temperatur maks.
+100 °C
Temperatur min.
-20 °C
Tryk maks.
210 bar
Trykkompenseret
No
Pakke str.
0 pcs
Stregkode
5704295025902
Brutto vægt
0,25 Kg
Netto vægt
0,25 Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Single-acting needle control valves for an accurate control of the fluid in one direction and free passage in the opposite direction.
Suitable for application with air, gas and liquids in general. Same basic characteristics as the FT 257 series: full shut off via metal seal; simple setting of flow rates; secure against accidental needle withdrawal; secure needle position with locking screw inserted in the handwheel; provisions for panel mounting, for which special lock nut (G) is supplied (on request only).
Materials:
Body: OT 58 - UNI 5705
Nickel plated.
Needle: X 10 Cr Ni S 1809 - UNI 6900.
O-ring: Nitrile.
Antiextrusion ring PTFE.
Handwheel: ma GD - Al Si 12 UNI 5706 aluminium.
Copyright © 2026 HydraSpecma