Sun shuttle valve

Single ball shuttle valve with signal at port 3

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed at port 3.

  • Shuttle cartridges feature hardened steel balls and seats for excellent wear characteristics and contamination tolerance
  • The single ball allows for the decay of the pressure signal when both load ports drop to a lower pressure.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Partnumber:
CSAB-XXN

Package size:
0 pcs

Min. order quantity is:
1 pcs
Sun Block T11A 3/8
Partnumber: EAU
Sun hus T11A R1/2
Partnumber: EAV
Ventilhus SUN T-11A NG6
Partnumber: EBA/M
Sun sandwich valve Block cetop
Partnumber: EBY
Ventilhus SUN T-11A x2 NG6 Stål
Partnumber: EBY/S
Sun hus T11A
Partnumber: ECT
Sun hus T11A stål
Partnumber: ECT/S
Sun hus T11A R3/8
Partnumber: ECU
Sun stålhus T11A R3/8
Partnumber: ECU/S
Pakningssæt SUN T11-A Viton
Partnumber: 990-011-006
Pakningssæt t/Sun ventil T11A Buna
Partnumber: 990-011-007
Cavity
T-11A

Flow Nominel
10 lpm

Forureningsgrad maks.
19/17/14 - ISO 4406

Materiale
Steel

Model kode
CSABXXN

Mærke navn
Sun Hydraulics

Olieviskositet anbefalet
2,8 - 380 cSt

Pakningsmateriale
NBR

Temperatur maks.
+110 °C

Temperatur min.
-30 °C

Tilspændingsmoment
41 - 47 Nm

Tryk maks.
350 bar
Package size
0 pcs

Barcode
5704295337715

Gross weight
0,13 Kg

Net weight
0,13 Kg

Country of origin

Intrastat code
84812010

Single ball shuttle valve with signal at port 3

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed at port 3.

  • Shuttle cartridges feature hardened steel balls and seats for excellent wear characteristics and contamination tolerance
  • The single ball allows for the decay of the pressure signal when both load ports drop to a lower pressure.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.