Sun load control valve 1,5:1 CAV: T-11A 10LPM 70-280bar

1.5:1 pilot ratio, ultra-restrictive counterbalance valve

Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Other names for this valve include motion control valve and over-center valve.

  • Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
  • Restrictive valves have no relief capacity other than as a thermal relief.
  • Turn adjustment clockwise to decrease setting and release load.
  • Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.
  • Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
  • All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
  • Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
  • This valve has positive seals between all ports.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Partnumber:
CBAB-LHN

Package size:
0 pcs

Min. order quantity is:
1 pcs
Sun Block T11A 3/8
Partnumber: EAU
Sun Block steel, T11A 3/8
Partnumber: EAU/S
Sun Block T11A 1/2
Partnumber: EAV
Ventilhus SUN T-11A NG6
Partnumber: EBA
Ventilhus SUN T-11A NG6
Partnumber: EBA/M
Sun sandwich valve Block cetop
Partnumber: EBY
Ventilhus SUN T-11A x2 NG6 Stål
Partnumber: EBY/S
Sun Block T11A
Partnumber: ECT
Sun Block T11A steel
Partnumber: ECT/S
Ventilhus SUN T-11A G3/8
Partnumber: ECU
Ventilhus SUN T-11A G3/8'' Stål
Partnumber: ECU/S
Sun valve block T11A R1/2 steel
Partnumber: ECV/S
Ventilhus SUN T-11A G1/4''
Partnumber: EFT
Ventilhus SUN T-11A G3/8'' Stål
Partnumber: EJU/S
Sun valve block T-11A Steel
Partnumber: X4B/S
Sun Block 2 x T11A 1/2
Partnumber: YEV
P-sats SUN T11-A, Viton
Partnumber: 990-011-006
Seal kit t/Sun valve T11A Buna
Partnumber: 990-011-007
Brand Name
Sun Hydraulics

Cavity
T-11A

Contamination level max.
19/17/14 - ISO 4406

Flow rate nominal LMin
10 lpm

Material
Steel

Model code
CBAB-LHN

Oil viscocity recommended
2,8 - 380 cSt

Pilot ratio
1,5:1

Pressure max.
350 bar

Pressure setting max.
280 bar

Pressure setting min.
70 bar

Sealing material
NBR

Temperature max.
+110 °C

Temperature min.
-30 °C

Torque tightening
41 - 47 Nm
Package size
0 pcs

Barcode
5704334575832

Gross weight
0,17 Kg

Net weight
0,17 Kg

Country of origin

Intrastat code
84812010

1.5:1 pilot ratio, ultra-restrictive counterbalance valve

Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Other names for this valve include motion control valve and over-center valve.

  • Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
  • Restrictive valves have no relief capacity other than as a thermal relief.
  • Turn adjustment clockwise to decrease setting and release load.
  • Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.
  • Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
  • All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
  • Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
  • This valve has positive seals between all ports.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.