P-sats SUN T-10A, viton

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-10A or T-13A cavity.

  • The shelf life for this cartridge seal kit is twenty years from date of purchase. This date will be printed on the kit packaging.
  • The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 41 – 47 Nm.

Varenummer:
990-010-006

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
Brand Name
Sun Hydraulics

Cavity
T-10A

Sealing material
FKM/FPM (Viton®)
Pakke str.
0 pcs

Stregkode
5715803521991

Brutto vægt
Kg

Netto vægt
Kg

Oprindelsesland
usa

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-10A or T-13A cavity.

  • The shelf life for this cartridge seal kit is twenty years from date of purchase. This date will be printed on the kit packaging.
  • The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 41 – 47 Nm.