Pressure & Temp. sensor PT 600 Bar
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-600 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Partnumber:
1810000336
Package size:
0 pcs
Min. order quantity is:
1 pcs
Beskyttelsesklasse
IP 67
Gevind
G 1/2 BSP
Materiale
Stainless steel
Mærke navn
Stauff
Sensor type
CAN
Temperatur maks.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivelse maks.
+85 °C
Temperatur omgivelse min.
-25 °C
Tryk maks.
1200 bar
Tryk sprængning min.
1800 bar
Trykmåling
0-600 Bar
Package size
0 pcs
Barcode
5704334849612
Gross weight
Kg
Net weight
Kg
Country of origin
deu
Intrastat code
90262040
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-600 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma