Tryck & tempsensor PT
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-016 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
1810000328
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Material
Stainless steel
Pressure Measurement Bar
-1 - 16 Bar
Pressure burst min.
150 bar
Pressure max.
32 bar
Sensor type
CAN
Temperature ambient max.
+85 °C
Temperature ambient min.
-25 °C
Temperature max.
+105 °C
Temperature min.
-25 °C
Thread
G 1/2 BSP
Pakke str.
0 pcs
Stregkode
5715803529287
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-016 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma