XLS 395 Ø25.5mm 6B Spline SAE-A HPS

The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.

Key Advantages

  • High efficiency at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Integrated check valve as standard
  • Available with standard or high-pressure shaft seal
  • Displacement range: 50 to 395 cm³
  • Max. continuous pressure up to 175 bar
  • Max. intermittent torque up to 503 Nm
  • High speed capability (up to 1193 RPM depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers and mixers
  • Conveyors and feeding systems
  • Agricultural machinery and implements
  • Process and food industry machinery
  • Turf care and landscape equipment
  • Winches, drives, and lifting systems

Technical Highlights

  • Inlet pressure up to 225 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: -34 to +82 °C
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
  • Seal types: Standard or high-pressure shaft seal/7

Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.

Varenummer:
036-0505-003

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
Broms Reggiana RF2/32/DG-RF/288 Input/ Output OMR/OMP Ø25
Artikelnummer: 154-2846
Dobb.bremseventil, kpl. med 2 stk. E2A60ZN
Artikelnummer: OMP3E2AE2AK
Antal monteringshål
2

Arbetsportar
G 1/2 BSP

Axel diameter
25,4 mm

Axel spline
SAE 6B 1"

Axeltyp
Spline

Bultcirkel
106.4 mm

Deplacement
395 cm3

Dimension H
196 mm

Dräneringsport
G 1/4 BSP

Filtreringskrav
ISO cleanliness code 4406:20/18/13

Flänsens styrdiameter
82.5 mm

Färg
Black

Föroreningsgrad max.
20/18/13 - ISO 4406

Ingångstryck Max.
225

Integrerad backventil
Ja

Intermittent Rotationshastighet Max.
190

Intermittent effekt Max.
9.6

Intermittent flöde Max.
75

Intermittent vridmoment Max.
410 Nm

Kont. rotation max.
155 rpm

Kontinuerlig effekt max.
6.7 kW

Kontinuerligt flöde Max.
61

Längd
196 mm

Max. driftstemperatur
82 °C

Max. vridmoment på axel
340 Nm

Modell kod
MCS395AA07AA111020A000C00C

Moment kontinuerlig max.
483 Nm

Monteringsfläns
SAE-A2

Märke namn
Danfoss

Oljeviskositet rekommanderad
20 - 32 cSt

Portplacering
Side

Reces
82,55 mm

Temperatur max.
+82 °C

Temperatur min.
-34 °C

Tryck intermittent max.
90 bar

Tryck kontinuerlig max.
78 bar

Typ av axeltätning
High pressure packing

Utv. Splinesantal
6
Förpackningsstorlek
0 pcs

Streckkod

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
chn

Intrastat artikelkod
84122981

The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.

Key Advantages

  • High efficiency at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Integrated check valve as standard
  • Available with standard or high-pressure shaft seal
  • Displacement range: 50 to 395 cm³
  • Max. continuous pressure up to 175 bar
  • Max. intermittent torque up to 503 Nm
  • High speed capability (up to 1193 RPM depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers and mixers
  • Conveyors and feeding systems
  • Agricultural machinery and implements
  • Process and food industry machinery
  • Turf care and landscape equipment
  • Winches, drives, and lifting systems

Technical Highlights

  • Inlet pressure up to 225 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: -34 to +82 °C
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
  • Seal types: Standard or high-pressure shaft seal/7

Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.