XLS 195 Ø25.5mm 6B Spline SAE-A HPS
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Artikelnummer:
036-0502-003
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Brand Name
Danfoss
Contamination level max.
20/18/13 - ISO 4406
Continuous Flow Max.
61
Continuous power max.
12.7 kW
Continuous rotation max.
313 rpm
Dimension H
176 mm
Displacement
195 cm3
Drain line requirements
Optional (Not required due to integrated check valves)
Drainport
G 1/4 BSP
Filtration Requirement
ISO cleanliness code 4406:20/18/13
Flange style diameter
82.5 mm
Holes circle
106.4 mm
Inlet Pressure Max.
225
Integrated check valve
Yes
Intermittent Effect Max.
18.7
Intermittent Flow Maks.
75
Intermittent Rotation speed Max.
385
Intermittent Torque Max.
465 Nm
Length
176 mm
Max. operating temperature
82 °C
Model code
MCS195AA07AA111020A000C00C
Mounting flange
SAE-A2
Number of mounting holes
2
Number of outer grooves
6
Oil viscocity recommended
20 - 32 cSt
Paint
Black
Port Drawing Code
AA
Port position
Side
Pressure continous max.
144 bar
Pressure intermittent max.
175 bar
Recess
82,55 mm
Shaft Seal Type
High pressure packing
Shaft diameter
25,4 mm
Shaft spline
SAE 6B 1"
Shaft torque rating
340 Nm
Shaft type
Spline
Temperature max.
+82 °C
Temperature min.
-34 °C
Torque continuous max.
387 Nm
Working ports
G 1/2 BSP
Förpackningsstorlek
0 pcs
Streckkod
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
chn
Intrastat artikelkod
84122981
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2025 HydraSpecma