XLH 315 Ø25mm SAE-A HPS
Danfoss XLH Series – Robust Orbital Motors for Medium-Duty Applications
The Danfoss XLH series is designed for medium-duty mobile and industrial applications requiring reliable torque output at low speeds.
Based on the proven orbital motor principle with spool-valve distribution and hydrodynamic journal bearings, the XLH delivers efficient, stable, and durable performance in a compact and cost-effective design.
Each motor in the XLH range features a high-pressure shaft seal and rugged steel construction optimized for reliability and ease of installation. With SAE A 2-bolt flange mounting, multiple shaft options, and straightforward port configurations, the XLH provides flexibility across a wide range of hydraulic systems.
Key Advantages
- High efficiency and consistent torque at low speeds
- Compact and durable design for medium-duty operation
- Equal torque in both rotational directions
- Hydrodynamic journal bearings ensure long service life
- High-pressure shaft seal as standard on all models
- Wide displacement range: 50 – 485 cm³/rev
- Continuous pressure: up to 124 bar
- Intermittent pressure: up to 138 bar
- Continuous torque: up to 426 Nm
- Intermittent torque: up to 547 Nm
- Speed capability: up to 800 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, mixers, and sweepers
- Conveyors and material-handling systems
- Agricultural and forestry equipment
- Turf care and landscaping machinery
- Winches, drives, and auxiliary mechanisms
Technical Highlights
- Inlet pressure: up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 °C to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G ½ (pressure) / G ¼ (drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard)
Note
For continuous high-pressure or high-temperature operation, connecting an external case drain line is recommended to maintain low case pressure and extend seal life.
Artikelnummer:
016-0551-003
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Aksel diameter
25 mm
Akseltype
Cyl. Ø 25 mm (10)
Akseltætningstype
High pressure packing
Antal montage huller
2
Arbejdsporte
G 1/2 BSP
Boltcirkel
106.4 mm
Dimension H
179 mm
Drænport
G 1/4 BSP
Filtreringskrav
ISO cleanliness code 4406:20/18/13
Flangens Styrediameter
82.5 mm
Fortrængning
315 cm3
Forureningsgrad maks.
20/18/13 - ISO 4406
Indgangstryk Maks.
150 bar
Integreret Kontraventil
No
Intermittent Flow Maks.
68
Intermittent Moment Maks.
508 Nm
Intermittent Rotationshastighed Maks.
209
Kontinuerligt Flow Maks.
57
Krav til drænledning
Recommended (Required under high case pressure)
Længde
179 mm
Maks. driftstemperatur
82 °C
Maks. moment på aksel
340 Nm
Maling
Black
Model kode
XLH
Moment kontinuerlig maks.
377 Nm
Monteringsflange
SAE-A2
Mærke navn
Danfoss
Olieviskositet anbefalet
20 - 32 cSt
Portkode
AA
Portplacering
Side
Reces
82,55 mm
Rotationshastighed kontinuerligt maks.
174 rpm
Temperatur maks.
+180 °C
Temperatur min.
-30 °C
Tryk intermitterende maks.
124 bar
Tryk kontinuerligt maks.
90 bar
Förpackningsstorlek
0 pcs
Streckkod
5704334982722
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
CHN
Intrastat artikelkod
84122981
Danfoss XLH Series – Robust Orbital Motors for Medium-Duty Applications
The Danfoss XLH series is designed for medium-duty mobile and industrial applications requiring reliable torque output at low speeds.
Based on the proven orbital motor principle with spool-valve distribution and hydrodynamic journal bearings, the XLH delivers efficient, stable, and durable performance in a compact and cost-effective design.
Each motor in the XLH range features a high-pressure shaft seal and rugged steel construction optimized for reliability and ease of installation. With SAE A 2-bolt flange mounting, multiple shaft options, and straightforward port configurations, the XLH provides flexibility across a wide range of hydraulic systems.
Key Advantages
- High efficiency and consistent torque at low speeds
- Compact and durable design for medium-duty operation
- Equal torque in both rotational directions
- Hydrodynamic journal bearings ensure long service life
- High-pressure shaft seal as standard on all models
- Wide displacement range: 50 – 485 cm³/rev
- Continuous pressure: up to 124 bar
- Intermittent pressure: up to 138 bar
- Continuous torque: up to 426 Nm
- Intermittent torque: up to 547 Nm
- Speed capability: up to 800 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, mixers, and sweepers
- Conveyors and material-handling systems
- Agricultural and forestry equipment
- Turf care and landscaping machinery
- Winches, drives, and auxiliary mechanisms
Technical Highlights
- Inlet pressure: up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 °C to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G ½ (pressure) / G ¼ (drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard)
Note
For continuous high-pressure or high-temperature operation, connecting an external case drain line is recommended to maintain low case pressure and extend seal life.
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2025 HydraSpecma