XLH 125 Ø25.5mm 6B Spline SAE-A HPS
Danfoss XLH Series – Robust Orbital Motors for Medium-Duty Applications
The Danfoss XLH series is designed for medium-duty mobile and industrial applications requiring reliable torque output at low speeds.
Based on the proven orbital motor principle with spool-valve distribution and hydrodynamic journal bearings, the XLH delivers efficient, stable, and durable performance in a compact and cost-effective design.
Each motor in the XLH range features a high-pressure shaft seal and rugged steel construction optimized for reliability and ease of installation. With SAE A 2-bolt flange mounting, multiple shaft options, and straightforward port configurations, the XLH provides flexibility across a wide range of hydraulic systems.
Key Advantages
- High efficiency and consistent torque at low speeds
- Compact and durable design for medium-duty operation
- Equal torque in both rotational directions
- Hydrodynamic journal bearings ensure long service life
- High-pressure shaft seal as standard on all models
- Wide displacement range: 50 – 485 cm³/rev
- Continuous pressure: up to 124 bar
- Intermittent pressure: up to 138 bar
- Continuous torque: up to 426 Nm
- Intermittent torque: up to 547 Nm
- Speed capability: up to 800 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, mixers, and sweepers
- Conveyors and material-handling systems
- Agricultural and forestry equipment
- Turf care and landscaping machinery
- Winches, drives, and auxiliary mechanisms
Technical Highlights
- Inlet pressure: up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 °C to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G ½ (pressure) / G ¼ (drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard)
Note
For continuous high-pressure or high-temperature operation, connecting an external case drain line is recommended to maintain low case pressure and extend seal life.
Partnumber:
016-0535-003
Package size:
0 pcs
Min. order quantity is:
1 pcs
Ajoittainen virtaus Max.
68
Akselin halkaisija
25,4 mm
Akselin malli
Spline 6B 1" (07)
Akselin std.
SAE 6B 1"
Akselin tiivisteen tyyppi
High pressure packing
Asennuslaippa
SAE-A2
Asennusreikä määrä
2
H
153 mm
Integroitu takaiskuventtiili
No
Jatkuva virtaus max.
57
Kierre portit
BSPP
Kierrostilavuus
125 cm3
Laipan ohjaimen halkaisija
82.5 mm
Liitäntäkoodi
AA
Lämpötila max.
+82 °C
Lämpötila min.
-30 °C
Maali
Black
Maks. käyttölämpötila
82
Mallikoodi
MCH125AA07AA110020A000C00C
Max. vääntömomentti akselilla
400 Nm
Ohjain ø
82,55 mm
Paine hetkellinen max.
138 bar
Paine jatkuva max.
124 bar
Pituus
153 mm
Porttisijainti
Side
Puhtaustaso min.
20/18/13 - ISO 4406
Pyörimisnopeus jatkuva max.
462 rpm
Pyörimisnopeus hetkellinen max.
551 rpm
Reikien halkaisija ø
106.4 mm
Suodatusvaatimus
ISO cleanliness code 4406:20/18/13
Tulopaine max.
150
Tuotemerkit
Danfoss
Työportit
G 1/2 BSP
Vuotoliitäntä
G 1/4
Vuotolinjan käyttöä koskeva suositus
Recommended (Required under high case pressure)
Vääntömomentti hetkellinen max.
223 Nm
Vääntömomentti jatkuva max.
200 Nm
Öljyn viskositeetti suositus
20 - 32 cSt
Package size
0 pcs
Barcode
Gross weight
Kg
Net weight
Kg
Country of origin
chn
Intrastat code
84122981
Danfoss XLH Series – Robust Orbital Motors for Medium-Duty Applications
The Danfoss XLH series is designed for medium-duty mobile and industrial applications requiring reliable torque output at low speeds.
Based on the proven orbital motor principle with spool-valve distribution and hydrodynamic journal bearings, the XLH delivers efficient, stable, and durable performance in a compact and cost-effective design.
Each motor in the XLH range features a high-pressure shaft seal and rugged steel construction optimized for reliability and ease of installation. With SAE A 2-bolt flange mounting, multiple shaft options, and straightforward port configurations, the XLH provides flexibility across a wide range of hydraulic systems.
Key Advantages
- High efficiency and consistent torque at low speeds
- Compact and durable design for medium-duty operation
- Equal torque in both rotational directions
- Hydrodynamic journal bearings ensure long service life
- High-pressure shaft seal as standard on all models
- Wide displacement range: 50 – 485 cm³/rev
- Continuous pressure: up to 124 bar
- Intermittent pressure: up to 138 bar
- Continuous torque: up to 426 Nm
- Intermittent torque: up to 547 Nm
- Speed capability: up to 800 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, mixers, and sweepers
- Conveyors and material-handling systems
- Agricultural and forestry equipment
- Turf care and landscaping machinery
- Winches, drives, and auxiliary mechanisms
Technical Highlights
- Inlet pressure: up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 °C to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G ½ (pressure) / G ¼ (drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard)
Note
For continuous high-pressure or high-temperature operation, connecting an external case drain line is recommended to maintain low case pressure and extend seal life.
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma