6" ASPIROIL suction hose - 10 bar - 152x174 mm
Areas of use: - petrol - oil - diesel - petroleum - grease - paraffin - lubricating oil - water.
Recommended as pressure hose for mineral oil products such as: petrol, diesel, petroleum, lubrication oil, paraffin, grease etc. Can also be used with water.
Construction: Wear-resistant hose built on mandrel, with built-in steelwires and grounding wires. Electrical discharge via the grounding wires. Electrical resistance lesss than or equal to 10 MOhm, when couplings are mounted correct onto the hose.
Material:
Inner tube: Black synthetic oilresistant Nitrile (NBR).
Outer tube: Black Chloroprene (CR). Weather-, oil- and heat-resistant.
Standards: ISO 1307-1997
Bøjningsradius
980 mm
Diameter indvendig
152 mm
Diameter udvendig
174 mm
Længde
40 m
Slangestørrelse
6 "
Temperatur maks.
+100 °C
Temperatur min.
-30 °C
Tryk maks.
10 bar
Tryk sprængning min.
30 bar
Vakuum maks.
0.9 bar
Förpackningsstorlek
0 m
Streckkod
5704295969770
Bruttovikt
4,45 Kg
Nettovikt
4,45 Kg
Ursprungsland
Intrastat artikelkod
40093100
Areas of use: - petrol - oil - diesel - petroleum - grease - paraffin - lubricating oil - water.
Recommended as pressure hose for mineral oil products such as: petrol, diesel, petroleum, lubrication oil, paraffin, grease etc. Can also be used with water.
Construction: Wear-resistant hose built on mandrel, with built-in steelwires and grounding wires. Electrical discharge via the grounding wires. Electrical resistance lesss than or equal to 10 MOhm, when couplings are mounted correct onto the hose.
Material:
Inner tube: Black synthetic oilresistant Nitrile (NBR).
Outer tube: Black Chloroprene (CR). Weather-, oil- and heat-resistant.
Standards: ISO 1307-1997
Copyright © 2025 HydraSpecma