Red Exhaust hose type Flexlight M9. Dim. 44mm

Areas of application: Cold and hot air, flue gases, vapours.

Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.

Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.

Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.

Partnumber:
0110272044

Package size:
4 m

Min. order quantity is:
8 m
Bend radius
44 mm

Diameter inner
44 mm

Length
4 m

Pressure max.
2.5 bar

Temperature max.
+310 °C

Temperature min.
-85 °C

Vacuum max.
0.565 bar
Package size
4 m

Barcode
5704295672489

Gross weight
1,14 Kg

Net weight
1,14 Kg

Country of origin

Intrastat code
39172290

Areas of application: Cold and hot air, flue gases, vapours.

Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.

Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.

Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.