Adaptor male M16x2 female M12,

Test adaptor for connecting measuring equipment to a hydraulic test point interface. The adaptor provides an M16x2 male thread on one side and an M12,65x1,5 female thread on the other side for adapting between the two thread interfaces.

Sealed with FKM/FPM (Viton®) and supplied with a zinc-nickel plated surface treatment. Suitable for hydraulic systems with a maximum pressure of 630 bar and an operating temperature range of -20 to +100 °C.

Typical Applications
  • Connection of pressure gauges and measuring hoses to hydraulic test points
  • Diagnostic and commissioning measurements in hydraulic circuits

Varenummer:
SAD20/12-P

Pakke str.:
1 pcs

Min. bestillingsenhed er:
1 pcs
Gänga inv. metrisk
M12,65x1,5

Gänga utv. metrisk
M16x2

Modell kod
SAD-20/12-W3

Märke namn
Stauff

Packningsmaterial
FKM/FPM (Viton®)

T
M12,65x1,5

Temperatur max.
+100 °C

Temperatur min.
-20 °C

Tillverkningsmaterial
Steel

Tryck max.
630 bar

Ytskiktbehandling
Zinc-Nickel plated

h
39 mm
Pakke str.
1 pcs

Stregkode
212554

Brutto vægt
0,06 Kg

Netto vægt
0,06 Kg

Oprindelsesland
DEU

Intrastat varekode
84812010

Test adaptor for connecting measuring equipment to a hydraulic test point interface. The adaptor provides an M16x2 male thread on one side and an M12,65x1,5 female thread on the other side for adapting between the two thread interfaces.

Sealed with FKM/FPM (Viton®) and supplied with a zinc-nickel plated surface treatment. Suitable for hydraulic systems with a maximum pressure of 630 bar and an operating temperature range of -20 to +100 °C.

Typical Applications
  • Connection of pressure gauges and measuring hoses to hydraulic test points
  • Diagnostic and commissioning measurements in hydraulic circuits

Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet