Solenoid Valve 2/2 NC 35 L/min 230 Bar Manual override
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 and from 1 to 2. Some models have the option of a filter at port 2.
Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position or to interrupt a pressure line where flow normally passes in both directions.
Artikelnummer:
83012557
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Activation
Solenoid
Brand Name
Danfoss
Cavity
SDC08-2
Contamination level max.
20/18/14 - ISO 4406
Filter built-in
Yes
Flow rate nominal LMin
35 lpm
Manual operated
No
Model code
SVP08-NCR-00-00-M-B-F-00
Number of ways/positions
2/2
Oil viscocity recommended
12 - 54 cSt
Pressure max.
230 bar
Sealing material
NBR
Solenoidtype
M13 - R13
Temperature max.
+100 °C
Temperature min.
-40 °C
Torque tightening
35 - 40 Nm
Valve type
NC - Normally closed
Package size
1 st
Barcode
451741
Gross weight
Kg
Net weight
Kg
Country of origin
ita
Intrastat code
84812010
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 and from 1 to 2. Some models have the option of a filter at port 2.
Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position or to interrupt a pressure line where flow normally passes in both directions.
Copyright © 2025 HydraSpecma