Blue silicone heaterhose - Dim. 8.0mm (L=15.2 m)
Areas of use:
- cooling water
- heater hose
Characteristics: "Long life service" heater hose for water-cooled engines. Silicone heater hoses has extremely good durability and are very slowly aged, even when exposed to high temperaturs from both engine and cooling water. Compared to ordinary heater hoses in rubber, this means fewer numbers of replacements or repairs. Silicone rubber are also very cold-resistant and their flexibility remains even at temperatures down to -54°C. The burst pressure mentioned, meets SAE J20R3.
Construction: Extruded hose with reinforcement layers of Nylon.
Material: Inside and outside synthetic silicone-rubber (Q). Very heat- and Ozone-resistant. Also resistant to cooling detergents as Glycol. Outside resistant to light exposure from lubricating oils.
Hose clamps: Do not use hose clamps with holes in the band!.
Recommended working pressure: 25% of burst pressure.
Partnumber:
0114305008
Package size:
15 m
Min. order quantity is:
15 m
Anvendelsesområde
Glycol, Water
Bøjningsradius
40 mm
Diameter indvendig
8 mm
Diameter udvendig
16 mm
Farve
Blue
Mærke navn
Hydraspecma
Slangetype
1-ply
Standard
TMC RP303B Class I Grade II
Standard SAE
SAE J20 R3 Class A
Tryk sprængning min.
21.4 bar
Package size
15 m
Barcode
360888
Gross weight
0,19 Kg
Net weight
0,19 Kg
Country of origin
Intrastat code
39173900
Areas of use:
- cooling water
- heater hose
Characteristics: "Long life service" heater hose for water-cooled engines. Silicone heater hoses has extremely good durability and are very slowly aged, even when exposed to high temperaturs from both engine and cooling water. Compared to ordinary heater hoses in rubber, this means fewer numbers of replacements or repairs. Silicone rubber are also very cold-resistant and their flexibility remains even at temperatures down to -54°C. The burst pressure mentioned, meets SAE J20R3.
Construction: Extruded hose with reinforcement layers of Nylon.
Material: Inside and outside synthetic silicone-rubber (Q). Very heat- and Ozone-resistant. Also resistant to cooling detergents as Glycol. Outside resistant to light exposure from lubricating oils.
Hose clamps: Do not use hose clamps with holes in the band!.
Recommended working pressure: 25% of burst pressure.
Copyright © 2025 HydraSpecma