Reduction - 1/2" BSP x 1.1/4" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP) in hydraulic and fluid power assemblies. The fitting provides an external thread G 1/2 on one side and an internal thread G 1.1/4 on the other, allowing connection of components with different port sizes.
Sealing is via a profile sealing ring (WD) with NBR sealing material. The body is zinc-nickel plated and specified for a maximum pressure of 400 bar, with a temperature range of -35 to +100_x000C_. Overall length is 53 mm, with 55 mm hex for wrenching.
Typical Applications
- Adapting BSPP port sizes between hydraulic components and threaded connections
- Hydraulic lines and components where a G 1/2 male to G 1.1/4 female interface is required
Partnumber:
RI-12-114ED
Package size:
10 pcs
Min. order quantity is:
1 pcs
D2
10 mm
Gänga inv.
G 1.1/4 BSP
Gänga utv.
G 1/2 BSP
L1
53 mm
L2
26,5 mm
Längd
53 mm
Modell kod
FI-RED-R1/2-WD-R1-1/4-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
55 mm
Sexkant
55 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1.1/4 BSP
Tillverkningsmaterial
Steel
Totallängd
53 mm
Tryck max.
400 bar
Typ
Long
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
14 mm
Pakke str.
10 pcs
Stregkode
130481
Brutto vægt
0,47 Kg
Netto vægt
0,47 Kg
Oprindelsesland
DEU
Intrastat varekode
73071110
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP) in hydraulic and fluid power assemblies. The fitting provides an external thread G 1/2 on one side and an internal thread G 1.1/4 on the other, allowing connection of components with different port sizes.
Sealing is via a profile sealing ring (WD) with NBR sealing material. The body is zinc-nickel plated and specified for a maximum pressure of 400 bar, with a temperature range of -35 to +100_x000C_. Overall length is 53 mm, with 55 mm hex for wrenching.
Typical Applications
- Adapting BSPP port sizes between hydraulic components and threaded connections
- Hydraulic lines and components where a G 1/2 male to G 1.1/4 female interface is required
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma