Solenoid Valve 2/2 50l/m NC HSV10-22-02-H00-00-XC-P-00
This is a Spool Type, 2-Position, 2-Way, Normally Closed, Pull-Type, 10-size Solenoid Valve. When de-energized, the HSV10-22-02 blocks flow in both directions. When energized, the spool shifts to allow flow in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve.
Partnumber:
11133302
Package size:
1 st
Min. order quantity is:
1 st
Activation
Solenoid
Brand Name
Danfoss
Cavity
SDC10-2
Contamination level max.
20/18/14 - ISO 4406
Filter built-in
No
Flow rate nominal LMin
50 lpm
Manual operated
No
Model code
HSV10-22-02-H00-00-XC-P-00
Number of ways/positions
2/2
Oil viscocity recommended
12 - 54 cSt
Pressure max.
350 bar
Sealing material
Polyurethane
Solenoidtype
H16
Temperature max.
+100 °C
Temperature min.
-40 °C
Torque tightening
70 Nm
Valve type
NC - Normally closed
Package size
1 st
Barcode
374667
Gross weight
0,42 Kg
Net weight
0,42 Kg
Country of origin
ITA
Intrastat code
84812010
This is a Spool Type, 2-Position, 2-Way, Normally Closed, Pull-Type, 10-size Solenoid Valve. When de-energized, the HSV10-22-02 blocks flow in both directions. When energized, the spool shifts to allow flow in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve.
Copyright © 2025 HydraSpecma