Flow Divider ventil 30l/m 1:1 CP340-1-B-0-44

This is a fixed ratio flow divider/combiner valve.

In dividing mode, flow enters port 3 and passes across two fixed orifices in linked spools. If the pressure drop through one orifice is higher than the other, then the spools will move together to restrict the flow in the lower pressure outlet port. This maintains equal pressure drops across the spools, thus maintaining the flow division in the outlet ports.

In combining mode, flow will enter ports 2 and 4 pass through the orifices, which causes the spools to move to restrict the higher-pressure inlet and maintain equal pressure drops and equal flow into the valve. The CP340-1S provides synchronizing flow to the opposite port in the event that one port is completely blocked.

Partnumber:
130156-CP340

Package size:
1 st

Min. order quantity is:
1 st
Brand Name
Danfoss

Cavity
SDC10-4

Contamination level max.
20/18/14 - ISO 4406

Flow max. regulated
30 lpm

Flow min. regulated
30 lpm

Flow rate nominal LMin
45 lpm

Model code
CP340-1-B-0-44

Oil viscocity recommended
12 - 54 cSt

Pressure compensated
Yes

Pressure max.
210 bar

Sealing material
NBR

Temperature max.
+100 °C

Temperature min.
-40 °C

Torque tightening
41 - 47 Nm
Package size
1 st

Barcode
371485

Gross weight
0,11 Kg

Net weight
0,11 Kg

Country of origin
ITA

Intrastat code
84812010

This is a fixed ratio flow divider/combiner valve.

In dividing mode, flow enters port 3 and passes across two fixed orifices in linked spools. If the pressure drop through one orifice is higher than the other, then the spools will move together to restrict the flow in the lower pressure outlet port. This maintains equal pressure drops across the spools, thus maintaining the flow division in the outlet ports.

In combining mode, flow will enter ports 2 and 4 pass through the orifices, which causes the spools to move to restrict the higher-pressure inlet and maintain equal pressure drops and equal flow into the valve. The CP340-1S provides synchronizing flow to the opposite port in the event that one port is completely blocked.