Reduction - 1/2" BSP x 1/8" BSP female - WD seal
Thread reducer for adapting between two different Whitworth parallel pipe threads (BSPP) in a hydraulic connection. One side has a G 1/2 male thread and the other side a G 1/8 female thread, allowing a component port and a connecting fitting or hose to be matched when the thread sizes differ.
The WD sealing concept uses a profile sealing ring in NBR to create the seal at the interface. The steel body is zinc-nickel plated. Key selection points are the two BSPP thread sizes, the female/male orientation, and the pressure rating up to 630 bar.
Typical Applications
- Reducing BSPP port size in hydraulic manifolds, valve blocks, and components
- Adapting hydraulic pipework or hose-end connections where a WD profile sealing ring is used
Artikelnummer:
KN-08-02
Förpackningsstorlek:
25 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Hexagon
27 mm
L1
24 mm
L2
8 mm
Length
24 mm
Material
Steel
Model code
FI-RED-R1/2-WD-R1/8-B-W3
Pressure max.
630 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
27 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1/8 BSP
Thread inner
G 1/8 BSP
Thread outer
G 1/2 BSP
Total length
24 mm
Type
Short
i
14 mm
Förpackningsstorlek
25 pcs
Streckkod
399796
Bruttovikt
0,07 Kg
Nettovikt
0,07 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two different Whitworth parallel pipe threads (BSPP) in a hydraulic connection. One side has a G 1/2 male thread and the other side a G 1/8 female thread, allowing a component port and a connecting fitting or hose to be matched when the thread sizes differ.
The WD sealing concept uses a profile sealing ring in NBR to create the seal at the interface. The steel body is zinc-nickel plated. Key selection points are the two BSPP thread sizes, the female/male orientation, and the pressure rating up to 630 bar.
Typical Applications
- Reducing BSPP port size in hydraulic manifolds, valve blocks, and components
- Adapting hydraulic pipework or hose-end connections where a WD profile sealing ring is used
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma