Reduction - 1/2" BSP x 1 BSP female - WD seal
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The fitting has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger threaded port to be connected to a smaller threaded stud or line component.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the connection. The body is zinc-nickel plated steel and rated for a maximum working pressure of 400 bar, with an operating temperature range from -35_x000C_C to +100_x000C_C. Key selection parameters include the BSPP thread sizes, the WD sealing concept, and the main dimensions (overall length 49 mm, hex 41 mm).
Typical Applications
- Reducing BSPP port size on hydraulic components such as valves, manifolds, or housings
- Adapting BSPP threaded hydraulic lines and service connections where different thread sizes meet
Artikelnummer:
KN-08-16
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D2
12 mm
Hexagon
41 mm
L1
49 mm
L2
24,5 mm
Length
49 mm
Material
Steel
Model code
FI-RED-R1/2-WD-R1-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
41 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1 BSP
Thread inner
G 1 BSP
Thread outer
G 1/2 BSP
Total length
49 mm
Type
Long
i
14 mm
Förpackningsstorlek
10 pcs
Streckkod
399800
Bruttovikt
0,22 Kg
Nettovikt
0,22 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The fitting has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger threaded port to be connected to a smaller threaded stud or line component.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the connection. The body is zinc-nickel plated steel and rated for a maximum working pressure of 400 bar, with an operating temperature range from -35_x000C_C to +100_x000C_C. Key selection parameters include the BSPP thread sizes, the WD sealing concept, and the main dimensions (overall length 49 mm, hex 41 mm).
Typical Applications
- Reducing BSPP port size on hydraulic components such as valves, manifolds, or housings
- Adapting BSPP threaded hydraulic lines and service connections where different thread sizes meet
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma