Reduction - 1/2" BSP x 3/4" BSP female - WD seal

Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. The fitting has a G 1/2 male thread on one side and a G 3/4 female thread on the other, allowing a threaded connection between components or ports with different BSPP sizes.

Sealing is via a profile sealing ring in NBR. The steel body is zinc-nickel plated and designed for straight (0°) installation.

Typical Applications
  • Reducing or increasing BSPP threaded interfaces between hydraulic components
  • Adapting line connections where a G 1/2 male thread must connect to a G 3/4 female port

Partnumber:
KN-08-12

Package size:
25 pcs

Min. order quantity is:
1 pcs
D2
12 mm

Gänga inv.
G 3/4 BSP

Gänga utv.
G 1/2 BSP

L1
46 mm

L2
22 mm

Längd
46 mm

Modell kod
FI-RED-R1/2-WD-R3/4-B-W3

Märke namn
Stauff

Packningsmaterial
NBR

REACH compliant
Yes

RoHs compliant
Yes

Rostbeständighet
1200 hours salt spray DIN EN ISO 9227

S1
36 mm

Sexkant
36 mm

Säkerhetsfaktor
4

Temperatur max.
+100 °C

Temperatur min.
-35 °C

Thread T1
G 1/2 BSP

Thread T2
G 3/4 BSP

Tillverkningsmaterial
Steel

Totallängd
46 mm

Tryck max.
400 bar

Typ
Long

Vinkel
0 °

Ytskiktbehandling
Zinc-Nickel plated

i
14 mm
Förpackningsstorlek
25 pcs

Streckkod
399799

Bruttovikt
0,18 Kg

Nettovikt
0,18 Kg

Ursprungsland
DEU

Intrastat artikelkod
73071110

Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. The fitting has a G 1/2 male thread on one side and a G 3/4 female thread on the other, allowing a threaded connection between components or ports with different BSPP sizes.

Sealing is via a profile sealing ring in NBR. The steel body is zinc-nickel plated and designed for straight (0°) installation.

Typical Applications
  • Reducing or increasing BSPP threaded interfaces between hydraulic components
  • Adapting line connections where a G 1/2 male thread must connect to a G 3/4 female port

Obs: För att öppna 3D-filer krävs ett program som stöder filformatet