Kemikalieslang Chem Master UHMWPE SD 38x6.5xCL40
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Partnumber:
CMUSD-38
Package size:
61 m
Min. order quantity is:
1 m
Area of use
Chemicals compatible with UHMWPE
Bend radius
190 mm
Color
Black
Cover
CSM (Chlorosulfinated Polyethylene) based
Diameter inner
38 mm
Diameter outer
51 mm
Electrically conductive
R < 10^6 Ohm
Length
40 m
Material
UHMWPE
Pressure burst min.
64 bar
Pressure max.
16 bar
Size
1.1/2 "
Standard EN
EN 12115
Temperature intermittent max.
+130 °C
Temperature max.
+100 °C
Temperature min.
-35 °C
Tube
UHMWPE
Vacuum max.
0.9 bar
Package size
61 m
Barcode
228448
Gross weight
1,20 Kg
Net weight
1,20 Kg
Country of origin
swe
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Copyright © 2026 HydraSpecma