OVERCENTER VALVE VCB06-EN--1-B-00
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Artikelnummer:
820153929
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Flödeshastighet nominell LMin
60 lpm
Föroreningsgrad max.
20/18/14 - ISO 4406
Kavitet
NCS06/3
Modell kod
VCB06-EN-1-B-00
Märke namn
Danfoss
Oljeviskositet rekommanderad
12 - 54 cSt
Pilot förhållande
4,1:1
Tryck max.
350 bar
Tryckinställning max.
140 bar
Tryckinställning min.
25 bar
Åtdragning moment
44 - 50 Nm
Förpackningsstorlek
1 st
Streckkod
374718
Bruttovikt
0,25 Kg
Nettovikt
0,25 Kg
Ursprungsland
Intrastat artikelkod
84812010
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Copyright © 2026 HydraSpecma