Pressure sensor-PPC-CAN-P-400 CAN sensor
The CAN Pressure Sensor-PPC-CAN-P-400 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
PPC-CAN-P-400
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Gevind
G 1/4 BSP
Materiale
Stainless steel
Mærke navn
Stauff
Sensor type
CAN
Temperatur maks.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivelse maks.
+85 °C
Temperatur omgivelse min.
-25 °C
Tryk maks.
800 bar
Tryk sprængning min.
1200 bar
Trykmåling
0 - 400 Bar
Package size
1 st
Barcode
356935
Gross weight
Kg
Net weight
Kg
Country of origin
deu
The CAN Pressure Sensor-PPC-CAN-P-400 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma