FLOW CONTROL VALVE VRC 06-M-1.25-SE-1/2
This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.
Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.
Partnumber:
820106119
Package size:
1 st
Min. order quantity is:
1 st
Brand Name
Danfoss
Cavity
NCS06/3
Contamination level max.
20/18/14 - ISO 4406
Flow max. regulated
4 lpm
Flow min. regulated
1 lpm
Flow rate nominal LMin
30 lpm
Inlet flow max.
50 lpm
Model code
VRC06-M-1.25-SE-1/2
Oil viscocity recommended
12 - 54 cSt
Pressure compensated
Yes
Pressure max.
315 bar
Temperature max.
+100 °C
Temperature min.
-40 °C
Torque tightening
45 - 50 Nm
Package size
1 st
Barcode
374717
Gross weight
0,21 Kg
Net weight
0,21 Kg
Country of origin
Intrastat code
84812010
This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.
Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.
Copyright © 2025 HydraSpecma