XLS 160 Ø25mm SAE-A HPS

The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.

Key Advantages

  • High efficiency at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Integrated check valve as standard
  • Available with standard or high-pressure shaft seal
  • Displacement range: 50 to 395 cm³
  • Max. continuous pressure up to 175 bar
  • Max. intermittent torque up to 503 Nm
  • High speed capability (up to 1193 RPM depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers and mixers
  • Conveyors and feeding systems
  • Agricultural machinery and implements
  • Process and food industry machinery
  • Turf care and landscape equipment
  • Winches, drives, and lifting systems

Technical Highlights

  • Inlet pressure up to 225 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: -34 to +82 °C
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
  • Seal types: Standard or high-pressure shaft seal/7

Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.

Artikelnummer:
036-0519-003

Förpackningsstorlek:
0 pcs

Minsta beställningskvantitet:
1 pcs
Brake RF2/32/DG-RF/288 Input OMR/OMP Output OMR/OMP ø25
Artikelnummer: 154-2846
Dual load control valve With 2 E2A60ZN
Artikelnummer: OMP3E2AE2AK
Brand Name
Danfoss

Contamination level max.
20/18/13 - ISO 4406

Continuous Flow Max.
61

Continuous power max.
15.4 kW

Continuous rotation max.
386 rpm

Dimension H
169 mm

Displacement
160 cm3

Drainport
G 1/4 BSP

Flange style diameter
82.5 mm

Holes circle
106.4 mm

Inlet Pressure Max.
225

Integrated check valve
Ja

Intermittent Effect Max.
22.6

Intermittent Flow Maks.
75

Intermittent Rotation speed Max.
474

Intermittent Torque Max.
454 Nm

Length
169 mm

Max. operating temperature
82 °C

Model code
XLS

Mounting flange
SAE-A2

Number of mounting holes
2

Oil viscocity recommended
20 - 32 cSt

Port position
Side

Pressure continous max.
175 bar

Pressure intermittent max.
207 bar

Recess
82,55 mm

Shaft Seal Type
High pressure packing

Shaft diameter
25 mm

Shaft torque rating
395 Nm

Shaft type
Cyl. Ø 25 mm (10)

Temperature max.
+82 °C

Temperature min.
-34 °C

Torque continuous max.
380 Nm

Working ports
G 1/2 BSP
Förpackningsstorlek
0 pcs

Streckkod
5704334982593

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
CHN

Intrastat artikelkod
84122981

The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.

Key Advantages

  • High efficiency at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Integrated check valve as standard
  • Available with standard or high-pressure shaft seal
  • Displacement range: 50 to 395 cm³
  • Max. continuous pressure up to 175 bar
  • Max. intermittent torque up to 503 Nm
  • High speed capability (up to 1193 RPM depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers and mixers
  • Conveyors and feeding systems
  • Agricultural machinery and implements
  • Process and food industry machinery
  • Turf care and landscape equipment
  • Winches, drives, and lifting systems

Technical Highlights

  • Inlet pressure up to 225 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: -34 to +82 °C
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
  • Seal types: Standard or high-pressure shaft seal/7

Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.