- Hydraulic hoses
- Hydraulic pipes
- Industrial hoses and couplings
- Machines and tools
- Motors and steering units
- Oil coolers
-
Pipe clamps
- Console clamps heavy series SPGU
- Console clamps light series LPGU
- Flat steel and round steel U-Bolt clamps
- Metal DIN clamps
- Mounting rails and U-bolts
- Piggyback clamps
- Pipe clamps - DIN3015-1 - Standard series
- Pipe clamps - DIN3015-2 - Heavy series
- Pipe clamps - DIN3015-3 - Twin series
- Pipe clamps - Heavy series with rubber bushing
- Pipe clamps - Lightweight series
- Pipe clamps type STF
- Pipe clamps type exhaust, PC
- Pipe feed-through SRF
- Prevention of Crevice Corrosion for stainless pipework
- Rubber clamps
- Pneumatic
- You are here
- Products
- Pneumatic
- Valves
- Herion valves
Herion valves
Norgren electrically controlled valves for mobile pneumatics are developed in close cooperation with several of the world's leading truck manufacturers.
The demands on function are very high. Properties such as lifetime, operational reliability, vibration and shock resistance, temperature shock, resistance to moisture and salt, moisture and mud, etc., are very well defined. All verification has taken place according to accepted standards. As an example, cold tests according to IEC 68-2-1 Ab.
Valves from series 90400 are available as 2/2 and 3/2 valves with normally open alt. normally closed function. Several valves can be built together in valve ramps, which provides a simple assembly. In case of single assembly, the connection on both inlet and outlet is M12x1.5. The venting takes place on the upper side of the magnetic coil. An effective membrane protects against the penetration of water and pollution.
Alternatively, valves with an M12x1.5 connection are also available for venting. When the valve is mounted in a ramp, the valves are connected with a special mounting kit so that the valves have a common continuous air supply channel. The air supply is connected to the first valve in the ramp. The last valve in the ramp is plugged.
The valves are sold in Sweden with three different electrical connections; A two-pole connector that is locked with an M24x1 lock nut, a two-pole special connector (Volvo compatible) that is locked with a snap function and a two-pole connector with bayonet mounting according to DIN 72585.
HYDRASPECMA
– DIN PARTNER FRA IDÉ
TIL SERIEPRODUKTION
Hos HydraSpecma er vi specialiserede i at designe og bygge state-of-the-art hydrauliske og elektriske systemer, skræddersyet til vores kunders forskellige behov på tværs af brancher.
Vores ekspertise stopper ikke bare der. Vi er også førende inden for levering af omfattende slange- & rørledningsartikler – fra højkvalitets slanger og rør til robuste fittings og adaptere – som sikrer problemfri væskekontrol og langtidsholdbar ydeevne.
Vi tilbyder også et stærkt produktudvalg til industrien for vedvarende energi, der understøtter din virksomhed med markedsførende køleløsninger, smøre- og filtreringssystemer, hydrauliske systemer samt slanger, rør og fittings.
Vores passion for innovation matches af vores ansvar for kvalitet. Hvert produkt og system i vores omfattende sortiment afspejler dette. Uanset om du arbejder med komplekse hydrauliske systemer eller søger pålidelige komponenter, leverer vi løsningen, du har brug for.
Tag næste skridt med os og oplev, hvordan præcision og teknik går hånd i hånd – og hvor hver eneste forbindelse handler om mere end komponenter og systemer; det handler om mennesker og deres forretning.