Weld plate - DIN 1 Twin - Phosphated
Weld plate for mounting a twin pipe clamp arrangement by welding the plate to a structure and using the threaded connection as the clamp fastening point. Designed for DIN 3015 Part 3 installations in size 1.
The plate geometry is defined by the dimensional parameters L 37 mm, B 30 mm, S 3 mm, H 6.5 mm and ØD 12 mm, with an M6 thread. The phosphated (black) surface treatment supports use as a welded mounting base in hydraulic pipe and tube routing where a fixed clamp position is required.
Typical Applications
- Weld-on mounting point for twin pipe clamp installations in hydraulic pipe and tube runs
- Fabrication and repair work where a welded clamp base is used to position and secure lines
Osanumero:
SP1D
Pakkauskoko:
25 pcs
Pienin tilausmäärä on:
1 pcs
B
30 mm
D
12 mm
DIN koko
1
G
M6
H
6,5 mm
Kierre
M6
Kierre metrinen
M6
Kiinnikkeiden määrä
1
L
37 mm
Leveys
30 mm
Mallikoodi
SP-1D-M-W2
Materiaali
Steel
Pinta
Phosphated (black)
Pituus
37 mm
Ryhmä Stauff
1D
S
3 mm
Standardi DIN
DIN 3015 part 3
Tuotemerkit
Stauff
Förpackningsstorlek
25 pcs
Streckkod
212840
Bruttovikt
0,03 Kg
Nettovikt
0,03 Kg
Ursprungsland
DEU
Intrastat artikelkod
39259010
Weld plate for mounting a twin pipe clamp arrangement by welding the plate to a structure and using the threaded connection as the clamp fastening point. Designed for DIN 3015 Part 3 installations in size 1.
The plate geometry is defined by the dimensional parameters L 37 mm, B 30 mm, S 3 mm, H 6.5 mm and ØD 12 mm, with an M6 thread. The phosphated (black) surface treatment supports use as a welded mounting base in hydraulic pipe and tube routing where a fixed clamp position is required.
Typical Applications
- Weld-on mounting point for twin pipe clamp installations in hydraulic pipe and tube runs
- Fabrication and repair work where a welded clamp base is used to position and secure lines
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma