Reduction - 1.1/2" BSP x 3/4" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Artikelnummer:
RI-112-34ED
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Hexagon
55 mm
L1
36 mm
L2
16 mm
Length
36 mm
Material
Steel
Model code
FI-RED-R1-1/2-WD-R3/4-B-W3
Pressure max.
315 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
55 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1.1/2 BSP
Thread T2
G 3/4 BSP
Thread inner
G 3/4 BSP
Thread outer
G 1.1/2 BSP
Total length
36 mm
Type
Short
i
22 mm
Förpackningsstorlek
10 pcs
Streckkod
130468
Bruttovikt
0,41 Kg
Nettovikt
0,41 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma