XLS 80 Ø25mm SAE-A HPS
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Varenummer:
036-0516-003
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Antal monteringshål
2
Arbetsportar
G 1/2 BSP
Axel diameter
25 mm
Axeltyp
Cyl. Ø 25 mm (10)
Bultcirkel
106.4 mm
Deplacement
80 cm3
Dimension H
158 mm
Dräneringsport
G 1/4 BSP
Flänsens styrdiameter
82.5 mm
Föroreningsgrad max.
20/18/13 - ISO 4406
Ingångstryck Max.
225
Integrerad backventil
Ja
Intermittent Rotationshastighet Max.
931
Intermittent effekt Max.
23.4
Intermittent flöde Max.
75
Intermittent vridmoment Max.
240 Nm
Kont. rotation max.
757 rpm
Kontinuerlig effekt max.
16 kW
Kontinuerligt flöde Max.
61
Längd
158 mm
Max. driftstemperatur
82 °C
Max. vridmoment på axel
340 Nm
Modell kod
XLS
Moment kontinuerlig max.
202 Nm
Monteringsfläns
SAE-A2
Märke namn
Danfoss
Oljeviskositet rekommanderad
20 - 32 cSt
Portplacering
Side
Reces
82,55 mm
Temperatur max.
+82 °C
Temperatur min.
-34 °C
Tryck intermittent max.
207 bar
Tryck kontinuerlig max.
175 bar
Typ av axeltätning
High pressure packing
Pakke str.
1 st
Stregkode
469909
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
CHN
Intrastat varekode
84122981
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Copyright © 2025 HydraSpecma