Blue silicone heaterhose - Dim. 6.0mm (L=15.2 m)
Areas of application :
- cooling water
- heaters
Features : "Long life service" heater hose for water-cooled engines. Heater hoses in silicone rubber have extremely good durability and age very slowly, even when the hoses are exposed to high temperatures both in the form of radiant heat from the engine and from cooling water. Compared to regular rubber heater hoses, this means fewer replacements or repairs. Likewise, silicone rubber is very cold-resistant and retains its flexibility down to -54 ° C. The burst pressure specified for hose corresponds to SAE J20R3.
Construction : Extruded hose with Nylon inserts.
Material : Inner and outer synthetic silicone rubber (Q) that is extremely heat and ozone resistant. Resistant to coolant additives such as glycol. Externally resistant to light exposure to lubricating oils.
Hole tapes of perforated types for attaching silicone tubing must not be used.
Recommended working pressure : 25% of blasting pressure.
Varenummer:
0114305006
Pakke str.:
15 m
Min. bestillingsenhed er:
15 m
Hvis du bestiller denne vare, så vil
SBSH-6-25M
blive bestilt i stedet for.
Anvendelsesområde
Glycol, Water
Bøjningsradius
30 mm
Diameter indvendig
6 mm
Diameter udvendig
15 mm
Farve
Blue
Mærke navn
Hydraspecma
Slangetype
1-ply
Standard
TMC RP303B Class I Grade II
Standard SAE
SAE J20 R3 Class A
Tryk sprængning min.
22.1 bar
Pakke str.
15 m
Stregkode
375771
Brutto vægt
2,34 Kg
Netto vægt
2,34 Kg
Oprindelsesland
Intrastat varekode
39173900
Areas of application :
- cooling water
- heaters
Features : "Long life service" heater hose for water-cooled engines. Heater hoses in silicone rubber have extremely good durability and age very slowly, even when the hoses are exposed to high temperatures both in the form of radiant heat from the engine and from cooling water. Compared to regular rubber heater hoses, this means fewer replacements or repairs. Likewise, silicone rubber is very cold-resistant and retains its flexibility down to -54 ° C. The burst pressure specified for hose corresponds to SAE J20R3.
Construction : Extruded hose with Nylon inserts.
Material : Inner and outer synthetic silicone rubber (Q) that is extremely heat and ozone resistant. Resistant to coolant additives such as glycol. Externally resistant to light exposure to lubricating oils.
Hole tapes of perforated types for attaching silicone tubing must not be used.
Recommended working pressure : 25% of blasting pressure.
Copyright © 2026 HydraSpecma