5/8" Hydraulic hose SPT-110-N - 1SN WP 130 bar
Hydraulic hose with 5/8" (16 mm) inner diameter for conveying liquids such as diesel, grease, oil and water in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber tube and cover, reinforced with a single high-tensile steel wire braid.
Designed for use where a defined pressure rating and bending capability are required; the minimum bend radius is 100 mm. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT.
Typical Applications
- Hydraulic lines and fluid transfer lines for oil-based and water-based media
- Service and workshop hose replacement where 5/8" ID and 1SN construction are specified
Partnumber:
SPT110SN
Package size:
1 m
Min. order quantity is:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
100 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
16 mm
Diameter outer
23.1 mm
Hose size
5/8 "
Hose type
1SN
Pressure burst min.
520 bar
Pressure max.
130 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Package size
1 m
Barcode
408707
Gross weight
0,46 Kg
Net weight
0,46 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose with 5/8" (16 mm) inner diameter for conveying liquids such as diesel, grease, oil and water in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber tube and cover, reinforced with a single high-tensile steel wire braid.
Designed for use where a defined pressure rating and bending capability are required; the minimum bend radius is 100 mm. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT.
Typical Applications
- Hydraulic lines and fluid transfer lines for oil-based and water-based media
- Service and workshop hose replacement where 5/8" ID and 1SN construction are specified
Crimp dimensions for SPT110SN
|
Hose type |
Diamter - inch |
Hose coupling type |
Ferrule |
Crimp dimension - mm |
Skiving - int. |
Skiving - ext. |
Operating pressure |
|---|---|---|---|---|---|---|---|
| SPT110SN | PS10 | 1C4010-10 |
26.5 mm
0
0.2 |
No | No |
Copyright © 2026 HydraSpecma