1/4" Hydraulichose SPT-104-N - 1SN WP 225 bar
Hydraulic hose designed to transfer diesel, grease, oil, and water in hydraulic and fluid-handling lines. The hose is built with a synthetic rubber inner tube and synthetic rubber cover, reinforced with 1 layer of high-tensile steel wire braid for pressure capability.
The 1/4" size (6.4 mm inner diameter) is commonly selected for compact hydraulic circuits where tight routing is required. A minimum bend radius of 50 mm supports installation in confined spaces, while the specified temperature range covers low-temperature operation down to -40°C and continuous duty up to +100°C, with intermittent peaks up to +120°C.
Typical Applications
- Hydraulic lines carrying oil-based fluids within the specified temperature and pressure limits
- Fluid transfer lines for diesel, grease, oil, and water
Osanumero:
SPT104SN
Pakkauskoko:
1050 m
Pienin tilausmäärä on:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
50 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
6.4 mm
Diameter outer
12.8 mm
Hose size
1/4 "
Hose type
1SN
Pressure burst min.
900 bar
Pressure max.
225 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Package size
1050 m
Barcode
408704
Gross weight
0,20 Kg
Net weight
0,20 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose designed to transfer diesel, grease, oil, and water in hydraulic and fluid-handling lines. The hose is built with a synthetic rubber inner tube and synthetic rubber cover, reinforced with 1 layer of high-tensile steel wire braid for pressure capability.
The 1/4" size (6.4 mm inner diameter) is commonly selected for compact hydraulic circuits where tight routing is required. A minimum bend radius of 50 mm supports installation in confined spaces, while the specified temperature range covers low-temperature operation down to -40°C and continuous duty up to +100°C, with intermittent peaks up to +120°C.
Typical Applications
- Hydraulic lines carrying oil-based fluids within the specified temperature and pressure limits
- Fluid transfer lines for diesel, grease, oil, and water
Copyright © 2026 HydraSpecma