Hexagon rail nut - DIN 1-8 + 1 Twin - ZiNi
Hexagon rail nut for fastening pipe clamp assemblies in a mounting rail system. The nut slides into a mounting rail and provides a threaded fixing point for clamp bolts in Twin Series installations according to DIN 3015, Part 3.
This version is sized for DIN group 1 and uses an M6 thread. Zinc-nickel plated surface treatment is specified for the rail nut. Dimensional selection is based on the DIN group size and the rail nut dimensions to match the mounting rail and clamp arrangement.
Typical Applications
- Mounting of Twin Series pipe clamps into mounting rails in hydraulic and fluid line routing
- Clamp installations where a sliding rail nut is used to position and secure the clamping point
Artikelnummer:
SM
Förpackningsstorlek:
50 pcs
Minsta beställningskvantitet:
1 pcs
B
10,4 mm
D
12 mm
DIN storlek
1
G
M6
Grupp Stauff
1D
Gänga
M6
Gänga metrisk
M6
H1
14,2 mm
H2
5,5 mm
L
25,5 mm
Modell kod
SM-1-8/1D-M-W3
Märke namn
Stauff
Tillverkningsmaterial
Steel
Ytskiktbehandling
Zinc-Nickel plated
Förpackningsstorlek
50 pcs
Streckkod
212778
Bruttovikt
0,01 Kg
Nettovikt
0,01 Kg
Ursprungsland
DEU
Intrastat artikelkod
39259010
Hexagon rail nut for fastening pipe clamp assemblies in a mounting rail system. The nut slides into a mounting rail and provides a threaded fixing point for clamp bolts in Twin Series installations according to DIN 3015, Part 3.
This version is sized for DIN group 1 and uses an M6 thread. Zinc-nickel plated surface treatment is specified for the rail nut. Dimensional selection is based on the DIN group size and the rail nut dimensions to match the mounting rail and clamp arrangement.
Typical Applications
- Mounting of Twin Series pipe clamps into mounting rails in hydraulic and fluid line routing
- Clamp installations where a sliding rail nut is used to position and secure the clamping point
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma