Reduction - 1.1/2" BSP x 3/4" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Varenummer:
RI-112-34ED
Pakke str.:
10 pcs
Min. bestillingsenhed er:
1 pcs
Gänga inv.
G 3/4 BSP
Gänga utv.
G 1.1/2 BSP
L1
36 mm
L2
16 mm
Längd
36 mm
Modell kod
FI-RED-R1-1/2-WD-R3/4-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
55 mm
Sexkant
55 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1.1/2 BSP
Thread T2
G 3/4 BSP
Tillverkningsmaterial
Steel
Totallängd
36 mm
Tryck max.
315 bar
Typ
Short
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
22 mm
Pakke str.
10 pcs
Stregkode
130468
Brutto vægt
0,41 Kg
Netto vægt
0,41 Kg
Oprindelsesland
DEU
Intrastat varekode
73071110
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma